UV Stable Crystal Clear System is a high performance two component Clear epoxy system designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, Art work, and other applications requiring a clear, strong, plastic coating specifically designed to resist Yellowing caused by the sun and other Ultra Violet light sources. The material has an easy to use 1 to 1 by volume mix ratio, wets out substrates well, maintains its integrity over sharp corners, it has excellent air release qualities, and a relatively fast set time for an
epoxy coating which may be accelerated by mild heat to 160F. While this material will do much better then competitors products for non yellowing we still do not recommend it for permanent outdoor applications.
Advantages
100% Solids
Self Leveling, High Gloss
U.V. Resistant Formula
Excellent Air Release
Excellent Color StabilityImproved Impact Strength
Improved Surface Appearance
Early Development of Physical and Performance Properties
Produces a Tough, High Gloss, Water Resistant Coating
Eliminates Craters, Crawling and Fish Eyes
Blush Resistant
Base Resin A-Side Curing Agent B-Side
Appearance: Clear Syrup Clear Syrup
Viscosity, Spindle #4 @ 6 rpm: 12,000 (+/- 2,000) 1,150 (+/- 300)
Weight per Gallon: 9.6 Lbs. 8.0 Lbs.
Mix Ratio: 1 to 1 by Volume or 100 A to 83 B by Weight
Gel-Time (100 gr. mass): 25 minutes (+/- 5 min.)
1/4” Casting Tack Free Time: 2.5 hours (+/- 30 min.)
Thin film Set Time 4 to 8 Hours depending on thickness and ambient temperature
Full Cure 24 to 48 hours for optimum properties
Hardness 70—75 Shore D (full cure)
Elongation > 15%